Glue suitable for repairs on watersports equipment, diving suits, neoprene accessories, waterproof clothing and inflatables.
Instructions for Use
Clean worn neoprene with McNett Cotol-240™
For non-fabric surfaces, pull and then clean
Apply Aquasure® directly from the tube or with a brush
Leave it overnight to dry (10-14 hours)
For the 2-hour procedure, use McNett Cotol-240 Accelerator
Holes and tears: Create support with duct tape
Fill the gap and the 5mm area around it with Aquasure
Remove the tape when it is thoroughly dry
Seams: Place a 2mm thick drop overlapping the edges of the seam by at least 5mm
Apply a little pressure to fill the surface of the fabric
Caution: avoid contact with the skin. To remove Aquasure from your hands rub a piece of cloth with 99% isopropyl alcohol and then wash with soap and water.Aquasure is slippery when wet. For increased adhesion to footwear, sprinkle with sand ½ hour after application. Storage. Avoid contact with moisture. Push the contents towards the neck of the tube. Clean up any leftovers and close tightly. Store in a dry place. To extend the shelf life, place the product in a bag in the refrigerator. Leave it at room temperature for 6 hours before use. At low temperature the unused Aquasure will harden inside the tube. To restore it to its original state or to facilitate its flow, dip the tube in warm water for 15 minutes or hold it with warm hands until it softens.